bon j'ai trouver le plugin qui fonctionne mal c'est le plugin public_rules.amxx
Code:
*/
#include <amxmodx>
#include <amxmisc>
new base[] = "rules.txt"
new i, num, text[127], hudmsg[440] //max hudmessage length was 439 chars (?)
public plugin_init()
{
register_plugin("AMXX Public server rules", "1.20", "Priski")
// register command
register_concmd("rules_show", "rules", ADMIN_KICK, "- show rules to everybody")
register_concmd("rules_enable", "r_enable", ADMIN_KICK, "- <1|0> set automessagin on/off")
register_cvar("rules_admin_only", "0")
register_cvar("rules_join", "1")
register_cvar("rules_join_timeout", "5")
register_cvar("rules_hudmessage_time", "10")
register_cvar("rules_interval", "600")
register_clcmd("say /rules", "clientrules", ADMIN_ALL, "- show rules")
}
public plugin_cfg() {
if (!file_exists(base)) {
write_file(base, "; This is the public rules file, put your rules below")
write_file(base, "; Remember, max amount of characters is 439")
console_print(0, "%s file not found. creating new ...", base)
}
}
public client_authorized ( id ) {
// on join display rules
if (get_cvar_num("rules_join")) {
new tmp[1]
tmp[0] = id
set_task(1.0, "showrules",id,tmp,1)
console_print(0, "[user %d] client auth!", tmp[0])
}
return PLUGIN_HANDLED
}
public showrules (pid[]) {
new id = pid[0]
if ( get_user_team(id) != 1 && get_user_team(id) != 2 ) {
if (id) {
new tmp[1]
tmp[0] = id
set_task(2.0, "showrules",id,tmp,1) // not yet in server
console_print(0, "[user %d] wait for joining team ...", id)
}
return PLUGIN_HANDLED
}
new tmp[1]
tmp[0] = id
console_print(0, "[user %d] joined team : %d", id, get_user_team(id))
console_print(0, "[user %d] printing rules after %d seconds", id, get_cvar_num("rules_join_timeout"))
set_task(get_cvar_float("rules_join_timeout"), "printrules", id, tmp, 1) // not yet in server
return PLUGIN_HANDLED
}
public printrules(pid[])
{
new id = pid[0]
if (file_exists(base))
{
console_print(0, "[user] printing rules for user %d", id)
set_hudmessage ( 200, 150, 0, 0.02, 0.25, 2, 0.1, get_cvar_float("rules_hudmessage_time"), 0.05, 1.0, 1)
format(hudmsg, 439, "")
// read all the rules
for(i=0; read_file(base, i, text, 127, num); i++) {
if (num > 0 && text[0] != ';') {
// display with predefined delay
add(hudmsg,439,text)
add(hudmsg,439,"^n")
}
}
// show hudmessages
show_hudmessage(id, hudmsg)
}
return PLUGIN_HANDLED
}
public r_enable(id, level, cid)
{
if (!cmd_access(id, level, cid, 0)) { // NOT ADMIN
return PLUGIN_HANDLED
}
new arg[3]
read_argv(1, arg, 2)
new value = str_to_num(arg)
if (!isalnum(arg[0]))
value = -1
if (value == 0) {
if (task_exists(2)) // close task
remove_task(2)
console_print(id, "You have disabled automatic messages")
return PLUGIN_HANDLED
}
if (value == 1) {
// activate task, reload if already exist
if (task_exists(2)) {
change_task(2, get_cvar_float("rules_interval"))
} else {
set_task(get_cvar_float("rules_interval"), "rules", 2, "", 0, "b")
}
console_print(id, "You have enabled automatic messages")
return PLUGIN_HANDLED
}
if (task_exists(2)) {
console_print(id, "automessages is ON.")
} else {
console_print(id, "automessages is OFF.")
}
console_print(id, "rules_enable <1|0> (1 = ON, 0 = OFF)")
return PLUGIN_HANDLED
}
public clientrules(id, level, cid) {
new pID[1]
pID[0] = id
console_print(0,"[user %d]Print rules for me only",pID[0])
printrules(pID[0])
}
public rules(id, level, cid)
{
new pID[1]
pID[0] = id
if (!cmd_access(id, level, cid, 0)) { // NOT ADMIN
return PLUGIN_HANDLED
}
// read file to all users
pID[0] = 0
console_print(0,"[user %d]Print rules for all",id)
printrules(pID[0])
// Reset scheduled task after display
if (get_cvar_float("rules_interval") > 0) {
if (task_exists(2)) {
change_task(2, get_cvar_float("rules_interval"))
} else {
set_task(get_cvar_float("rules_interval"), "rules", 200, "", 0, "b")
}
}
return PLUGIN_HANDLED
}
qu'est-ce qui doit etre modifier pour que je n'ais plus les message [user 1].....
et eh quel qu'un sait comment on peut augmenter la limit d'entiter qui est de 512 car il me dit qu'il ne peut pas precache le sprite muzzle_shock car il y a 512 entiter precacher 
mais euh c'est precache_model qui a franchi la limitte du 512 
Linear Mode
