[ZAGOR]

Guys how to make this or where is the configs

[NotHappy]

I have this problem. Basically i want a vote that will firstly be group vote then map vote from this group so i changed sm_umc_endvote_type to 2 And it kind of worked but after group vote doesn't matter which group won there were all maps(from first group i belive) in the second part of vote.
My files:

umc_mapcycle.txt:

Spoiler

"umc_mapcycle"
{
"Bomb Scenario" //Name this whatever you like
{
"maps_invote" "5"
"de_aztec" {}
"de_cache" {}
"de_cbble" {}
"de_dust" {}
"de_dust2" {}
"de_inferno" {}
"de_mirage" {}
"de_nuke" {}
"de_overpass" {}
"de_season" {}
"de_train" {}
"de_zoo" {}
"de_resort" {}
"de_bazaar" {}
"de_blackgold" {}
"de_castle" {}
"de_facade" {}
"de_favela" {}
"de_log" {}
"de_marquis" {}
"de_mist" {}
"de_overgrown" {}
"de_rails" {}
"de_resort" {}
"de_seaside" {}
"de_vertigo" {}
"de_ali" {}
}

"Rescue Scenario" //Name this whatever you like
{
"maps_invote" "4"
"cs_italy" {}
"cs_office" {}
"cs_agency" {}
"cs_assault" {}
"cs_backalley" {}
"cs_downtown" {}
"cs_insertion" {}
"cs_rush" {}
"cs_militia" {}
"cs_motel" {}
"cs_thunder" {}
"cs_workout" {}
}

"Active Duty" //Name this whatever you like
{
"maps_invote" "3"
"de_dust2" {}
"de_inferno" {}
"de_mirage" {}
"de_overpass" {}
"de_train" {}
"de_cbble" {}
"de_cache" {}
}

"Reserved Duty" //Name this whatever you like
{
"maps_invote" "3"
"cs_italy" {}
"cs_office" {}
"cs_assault" {}
"de_aztec" {}
"de_dust" {}
"de_vertigo" {}
"cs_militia" {}
"de_nuke" {}
}
}

umc-endvote.cfg:

Spoiler

// This file was auto-generated by SourceMod (v1.3.
// ConVars for plugin "umc-endvote.smx"


/////////////////////////////////////////////////////////////////////////////////////
// Full Documentation for the End of Map Vote module is located at: //
// http://code.google.com/p/sourcemod-u.../ModuleEndVote //
/////////////////////////////////////////////////////////////////////////////////////


// Specifies which admin flags are necessary for a player to participate in a vote. If empty, all players can participate.
// -
// Default: ""
sm_umc_endvote_adminflags ""

// Allows a map to appear in the vote more than once. This should be enabled if you want the same map in different categories to be distinct.
// -
// Default: "1"
// Minimum: "0.000000"
// Maximum: "1.000000"
sm_umc_endvote_allowduplicates "1"

// When to change the map after a successful vote:
// 0 - Instant,
// 1 - Round End,
// 2 - Map End
// -
// Default: "2"
// Minumum: "0.000000"
// Maximum: "2.000000"
sm_umc_endvote_changetime "2"

// File to use for Ultimate Mapchooser's map rotation.
// -
// Default: "umc_mapcycle.txt"
sm_umc_endvote_cyclefile "umc_mapcycle.txt"

// Specifies how long a vote should be available for.
// -
// Default: "20"
// Minimum: "10.000000"
sm_umc_endvote_duration "20"

// Specifies if Ultimate Mapchooser should run an end of map vote.
// -
// Default: "1"
// Minimum: "0.000000"
// Maximum: "1.000000"
sm_umc_endvote_enabled "1"

// Sound file (relative to sound folder) to play at the completion of an end-of-map vote.
// -
// Default: ""
sm_umc_endvote_endsound ""

// Specifies how many more frags each extension adds to the frag limit.
// -
// Default: "10"
// Minimum: "1.000000"
sm_umc_endvote_extend_fragstep "10"

// Specifies how many more rounds each extension adds to the round limit.
// -
// Default: "5"
// Minimum: "1.000000"
sm_umc_endvote_extend_roundstep "5"

// Specifies how many more minutes each extension adds to the time limit.
// -
// Default: "15"
// Minimum: "1.000000"
sm_umc_endvote_extend_timestep "10"

// Number of extensions allowed each map.
// 0 disables the Extend Map option.
// -
// Default: "0"
// Minimum: "0.000000"
sm_umc_endvote_extends "1"

// Specifies what action to take if the vote doesn't reach the set theshold.
// 0 - Do Nothing,
// 1 - Perform Runoff Vote
// -
// Default: "0"
// Minimum: "0.000000"
// Maximum: "1.000000"
sm_umc_endvote_failaction "0"

// Specifies how many past map groups to exclude from the end of map vote.
// -
// Default: "0"
// Minimum: "0.000000"
sm_umc_endvote_groupexclude "0"

// Specifies how many past maps to exclude from the end of map vote. 1 = Current Map Only
// -
// Default: "4"
// Minimum: "0.000000"
sm_umc_endvote_mapexclude "2"

// Specifies whether vote menu items are displayed in a random order.
// -
// Default: "0"
// Minimum: "0.000000"
// Maximum: "1.000000"
sm_umc_endvote_menuscrambled "0"

// Specifies whether the number of nominated maps appearing in the vote for a map group should be limited by the group's "maps_invote" setting.
// -
// Default: "0"
// Minimum: "0.000000"
// Maximum: "1.000000"
sm_umc_endvote_nominate_strict "1"

// Determines whether End of Map Votes should be delayed until the end of the round in which they were triggered.
// -
// Default: "0"
// Minimum: "0.000000"
// Maximum: "1.000000"
sm_umc_endvote_onroundend "0"

// Delays the vote by the number of seconds specified for votes that are triggered on round end. (Due to mp_maxrounds or mp_winlimit)
// -
// Default: "0"
// Minimum: "0.000000"
sm_umc_endvote_roundend_delaystart "0"

// Specifies what action to take if the runoff vote reaches the maximum amount of runoffs and the set threshold has not been reached.
// 0 - Do Nothing,
// 1 - Change Map to Winner
// -
// Default: "0"
// Minimum: "0.000000"
// Maximum: "1.000000"
sm_umc_endvote_runoff_failaction "0"

// Specifies the maximum number of maps to appear in a runoff vote.
// 1 or 0 sets no maximum.
// -
// Default: "0"
// Minimum: "0.000000"
sm_umc_endvote_runoff_max "0"

// If specified, this sound file (relative to sound folder) will be played at the beginning of a runoff vote. If not specified, it will use the normal vote start sound.
// -
// Default: ""
sm_umc_endvote_runoff_sound ""

// Specifies a maximum number of runoff votes to run for any given vote.
// 0 = unlimited.
// -
// Default: "0"
// Minimum: "0.000000"
sm_umc_endvote_runoffs "0"

// Specifies when to start the vote based on frags remaining.
// -
// Default: "10"
// Minimum: "1.000000"
sm_umc_endvote_startfrags "10"

// Specifies when to start the vote based on rounds remaining. Use 0 on TF2 to start vote during bonus round time
// -
// Default: "2"
// Minimum: "0.000000"
sm_umc_endvote_startrounds "2"

// Sound file (relative to sound folder) to play at the start of an end-of-map vote.
// -
// Default: ""
sm_umc_endvote_startsound ""

// Specifies when to start the vote based on time remaining in minutes.
// -
// Default: "6"
// Minimum: "1.000000"
sm_umc_endvote_starttime "6"

// If a winning vote has less than this percentage of total votes, a runoff vote will be held.
// -
// Default: "0"
// Minimum: "0.000000"
// Maximum: "1.000000"
sm_umc_endvote_threshold "0"

// Controls end of map vote type:
// 0 - Maps,
// 1 - Groups,
// 2 - Tiered Vote (vote for a group, then vote for a map from the group).
// -
// Default: "0"
// Minimum: "0.000000"
// Maximum: "2.000000"
sm_umc_endvote_type "2"

[Bittersweet]

Originally Posted by NotHappy I have this problem. Basically i want a vote that will firstly be group vote then map vote from this group so i changed sm_umc_endvote_type to 2 And it kind of worked but after group vote doesn't matter which group won there were all maps(from first group i belive) in the second part of vote. My files: umc_mapcycle.txt: Spoiler "umc_mapcycle" { "Bomb Scenario" //Name this whatever you like { "maps_invote" "5" "de_aztec" {} "de_cache" {} "de_cbble" {} "de_dust" {} "de_dust2" {} "de_inferno" {} "de_mirage" {} "de_nuke" {} "de_overpass" {} "de_season" {} "de_train" {} "de_zoo" {} "de_resort" {} "de_bazaar" {} "de_blackgold" {} "de_castle" {} "de_facade" {} "de_favela" {} "de_log" {} "de_marquis" {} "de_mist" {} "de_overgrown" {} "de_rails" {} "de_resort" {} "de_seaside" {} "de_vertigo" {} "de_ali" {} } "Rescue Scenario" //Name this whatever you like { "maps_invote" "4" "cs_italy" {} "cs_office" {} "cs_agency" {} "cs_assault" {} "cs_backalley" {} "cs_downtown" {} "cs_insertion" {} "cs_rush" {} "cs_militia" {} "cs_motel" {} "cs_thunder" {} "cs_workout" {} } "Active Duty" //Name this whatever you like { "maps_invote" "3" "de_dust2" {} "de_inferno" {} "de_mirage" {} "de_overpass" {} "de_train" {} "de_cbble" {} "de_cache" {} } "Reserved Duty" //Name this whatever you like { "maps_invote" "3" "cs_italy" {} "cs_office" {} "cs_assault" {} "de_aztec" {} "de_dust" {} "de_vertigo" {} "cs_militia" {} "de_nuke" {} } } umc-endvote.cfg: Spoiler // This file was auto-generated by SourceMod (v1.3. // ConVars for plugin "umc-endvote.smx" ///////////////////////////////////////////////////////////////////////////////////// // Full Documentation for the End of Map Vote module is located at: // // http://code.google.com/p/sourcemod-u.../ModuleEndVote // ///////////////////////////////////////////////////////////////////////////////////// // Specifies which admin flags are necessary for a player to participate in a vote. If empty, all players can participate. // - // Default: "" sm_umc_endvote_adminflags "" // Allows a map to appear in the vote more than once. This should be enabled if you want the same map in different categories to be distinct. // - // Default: "1" // Minimum: "0.000000" // Maximum: "1.000000" sm_umc_endvote_allowduplicates "1" // When to change the map after a successful vote: // 0 - Instant, // 1 - Round End, // 2 - Map End // - // Default: "2" // Minumum: "0.000000" // Maximum: "2.000000" sm_umc_endvote_changetime "2" // File to use for Ultimate Mapchooser's map rotation. // - // Default: "umc_mapcycle.txt" sm_umc_endvote_cyclefile "umc_mapcycle.txt" // Specifies how long a vote should be available for. // - // Default: "20" // Minimum: "10.000000" sm_umc_endvote_duration "20" // Specifies if Ultimate Mapchooser should run an end of map vote. // - // Default: "1" // Minimum: "0.000000" // Maximum: "1.000000" sm_umc_endvote_enabled "1" // Sound file (relative to sound folder) to play at the completion of an end-of-map vote. // - // Default: "" sm_umc_endvote_endsound "" // Specifies how many more frags each extension adds to the frag limit. // - // Default: "10" // Minimum: "1.000000" sm_umc_endvote_extend_fragstep "10" // Specifies how many more rounds each extension adds to the round limit. // - // Default: "5" // Minimum: "1.000000" sm_umc_endvote_extend_roundstep "5" // Specifies how many more minutes each extension adds to the time limit. // - // Default: "15" // Minimum: "1.000000" sm_umc_endvote_extend_timestep "10" // Number of extensions allowed each map. // 0 disables the Extend Map option. // - // Default: "0" // Minimum: "0.000000" sm_umc_endvote_extends "1" // Specifies what action to take if the vote doesn't reach the set theshold. // 0 - Do Nothing, // 1 - Perform Runoff Vote // - // Default: "0" // Minimum: "0.000000" // Maximum: "1.000000" sm_umc_endvote_failaction "0" // Specifies how many past map groups to exclude from the end of map vote. // - // Default: "0" // Minimum: "0.000000" sm_umc_endvote_groupexclude "0" // Specifies how many past maps to exclude from the end of map vote. 1 = Current Map Only // - // Default: "4" // Minimum: "0.000000" sm_umc_endvote_mapexclude "2" // Specifies whether vote menu items are displayed in a random order. // - // Default: "0" // Minimum: "0.000000" // Maximum: "1.000000" sm_umc_endvote_menuscrambled "0" // Specifies whether the number of nominated maps appearing in the vote for a map group should be limited by the group's "maps_invote" setting. // - // Default: "0" // Minimum: "0.000000" // Maximum: "1.000000" sm_umc_endvote_nominate_strict "1" // Determines whether End of Map Votes should be delayed until the end of the round in which they were triggered. // - // Default: "0" // Minimum: "0.000000" // Maximum: "1.000000" sm_umc_endvote_onroundend "0" // Delays the vote by the number of seconds specified for votes that are triggered on round end. (Due to mp_maxrounds or mp_winlimit) // - // Default: "0" // Minimum: "0.000000" sm_umc_endvote_roundend_delaystart "0" // Specifies what action to take if the runoff vote reaches the maximum amount of runoffs and the set threshold has not been reached. // 0 - Do Nothing, // 1 - Change Map to Winner // - // Default: "0" // Minimum: "0.000000" // Maximum: "1.000000" sm_umc_endvote_runoff_failaction "0" // Specifies the maximum number of maps to appear in a runoff vote. // 1 or 0 sets no maximum. // - // Default: "0" // Minimum: "0.000000" sm_umc_endvote_runoff_max "0" // If specified, this sound file (relative to sound folder) will be played at the beginning of a runoff vote. If not specified, it will use the normal vote start sound. // - // Default: "" sm_umc_endvote_runoff_sound "" // Specifies a maximum number of runoff votes to run for any given vote. // 0 = unlimited. // - // Default: "0" // Minimum: "0.000000" sm_umc_endvote_runoffs "0" // Specifies when to start the vote based on frags remaining. // - // Default: "10" // Minimum: "1.000000" sm_umc_endvote_startfrags "10" // Specifies when to start the vote based on rounds remaining. Use 0 on TF2 to start vote during bonus round time // - // Default: "2" // Minimum: "0.000000" sm_umc_endvote_startrounds "2" // Sound file (relative to sound folder) to play at the start of an end-of-map vote. // - // Default: "" sm_umc_endvote_startsound "" // Specifies when to start the vote based on time remaining in minutes. // - // Default: "6" // Minimum: "1.000000" sm_umc_endvote_starttime "6" // If a winning vote has less than this percentage of total votes, a runoff vote will be held. // - // Default: "0" // Minimum: "0.000000" // Maximum: "1.000000" sm_umc_endvote_threshold "0" // Controls end of map vote type: // 0 - Maps, // 1 - Groups, // 2 - Tiered Vote (vote for a group, then vote for a map from the group). // - // Default: "0" // Minimum: "0.000000" // Maximum: "2.000000" sm_umc_endvote_type "2"

OK, so you've found the documentation, that's good. It sounds like what you want is a Tiered vote, not a Group vote. There are options in ultimate-mapchooser.cfg that effect this as well. Go thru every .cfg file line by line. As you have already discovered, the documentation is pretty good, though buried fairly well.

If you still have problems, make sure you set your error messages to verbose, and post those errors with your next post. If you see any file read on mismatch on key values, that usually means there is a character out of place in your mapcyclefile.

[doroemon]

Originally Posted by Powerlord All of the mapchoosers "work" with workshop maps to a lesser extent. Only the SourceMod 1.8 MapChooser and its subplugins have been updated to: Properly resolve and track workshop map names (i.e. they know that "workshop/123456789" and "workshop/pl_mymapname_b1.123456789" are the same map) Print the "nice" version of Workshop map name, such as "pl_mymapname_b1" (this is something new in SourceMod 1.. I will eventually update UMC to support this, but again it won't do anything if you're not using SM 1.8.

Sorry but The Workshop maps is not working on my server...
I tried four name format in my umc_mapcycle.txt but still not working
that is my format :
"481737043"
"pl_rivercrossing_rc2a"
"workshop/481737043"
"workshop/pl_rivercrossing_rc2a.ugc481737043"

can you help me please?
Sorry for my bad english..

[NotHappy]

Originally Posted by Bittersweet OK, so you've found the documentation, that's good. It sounds like what you want is a Tiered vote, not a Group vote. There are options in ultimate-mapchooser.cfg that effect this as well. Go thru every .cfg file line by line. As you have already discovered, the documentation is pretty good, though buried fairly well. If you still have problems, make sure you set your error messages to verbose, and post those errors with your next post. If you see any file read on mismatch on key values, that usually means there is a character out of place in your mapcyclefile.

I checked every cfg file and everything looks good. Same with umc_mapcycle.txt, and there are no error massages, i have no idea why this doesn't work

[Bittersweet]

Originally Posted by NotHappy I checked every cfg file and everything looks good. Same with umc_mapcycle.txt, and there are no error massages, i have no idea why this doesn't work

Are you are using the correct version for your game?

[NotHappy]

Originally Posted by Bittersweet Are you are using the correct version for your game?

i'm using 3.5.7 which i got from here: https://forums.alliedmods.net/showpo...postcount=3881

[Bittersweet]

Originally Posted by NotHappy i'm using 3.5.7 which i got from here: https://forums.alliedmods.net/showpo...postcount=3881

I don't think that is the latest version. You should either do an exhaustive search of this thread looking for the standard 3.4.7 (not beta or test), or just use the latest code from the repository and compile it yourself. The link to the source code is on the OP.

[NotHappy]

I've abandoned the idea of tired vote. And i have another problem with normal Map vote.

Once the vote showed up and map was changed on the second map there will be no vote and the map is replayed over and over again with this error:

L 10/18/2015 - 18:20:40: [umc-core.smx] ---------------------MAP CHANGE: de_mirage---------------------
L 10/18/2015 - 18:20:40: [umc-rockthevote.smx] RTV will be made available in 120 seconds.
L 10/18/2015 - 18:20:40: [umc-endvote.smx] End of map vote will appear after 898 seconds
L 10/18/2015 - 18:22:41: [umc-rockthevote.smx] RTV is now available.
L 10/18/2015 - 19:29:20: [umc-endvote.smx] Unable to create end of map vote time-trigger, trigger time already passed.
L 10/18/2015 - 19:29:21: [umc-endvote.smx] Unable to create end of map vote time-trigger, trigger time already passed.
L 10/18/2015 - 19:29:21: [umc-core.smx] ---------------------MAP CHANGE: de_mirage---------------------
L 10/18/2015 - 19:29:21: [umc-endvote.smx] End of map vote will appear after 898 seconds
L 10/18/2015 - 19:29:21: [umc-rockthevote.smx] RTV will be made available in 120 seconds.
L 10/18/2015 - 19:32:16: [umc-core.smx] ---------------------MAP CHANGE: de_mirage---------------------
L 10/18/2015 - 19:32:16: [umc-rockthevote.smx] RTV will be made available in 120 seconds.
L 10/18/2015 - 19:32:16: [umc-endvote.smx] Unable to create end of map vote time-trigger, trigger time already passed.
L 10/18/2015 - 19:32:16: [umc-endvote.smx] End of map vote will appear after 898 seconds
L 10/18/2015 - 19:33:05: [umc-endvote.smx] End of map vote will appear after 900 seconds
L 10/18/2015 - 19:34:17: [umc-rockthevote.smx] RTV is now available.
L 10/18/2015 - 19:36:22: [umc-endvote.smx] Unable to create end of map vote time-trigger, trigger time already passed.
L 10/18/2015 - 19:36:23: [umc-endvote.smx] Unable to create end of map vote time-trigger, trigger time already passed.
L 10/18/2015 - 19:36:23: [umc-core.smx] ---------------------MAP CHANGE: de_mirage---------------------
L 10/18/2015 - 19:36:23: [umc-endvote.smx] End of map vote will appear after 898 seconds
L 10/18/2015 - 19:36:23: [umc-rockthevote.smx] RTV will be made available in 120 seconds.
L 10/18/2015 - 19:55:17: [umc-core.smx] ---------------------MAP CHANGE: de_mirage---------------------
L 10/18/2015 - 19:55:17: [umc-rockthevote.smx] RTV will be made available in 120 seconds.
L 10/18/2015 - 19:55:17: [umc-endvote.smx] Unable to create end of map vote time-trigger, trigger time already passed.
L 10/18/2015 - 19:55:17: [umc-endvote.smx] End of map vote will appear after 898 seconds
L 10/18/2015 - 20:29:32: [umc-endvote.smx] Unable to create end of map vote time-trigger, trigger time already passed.
L 10/18/2015 - 20:29:32: [umc-endvote.smx] Unable to create end of map vote time-trigger, trigger time already passed.
L 10/18/2015 - 20:29:33: [umc-core.smx] ---------------------MAP CHANGE: de_mirage---------------------
L 10/18/2015 - 20:29:33: [umc-endvote.smx] End of map vote will appear after 898 seconds
L 10/18/2015 - 20:29:33: [umc-rockthevote.smx] RTV will be made available in 120 seconds.
L 10/18/2015 - 20:31:34: [umc-rockthevote.smx] RTV is now available.
L 10/18/2015 - 22:04:25: [umc-core.smx] ---------------------MAP CHANGE: de_mirage---------------------
L 10/18/2015 - 22:04:25: [umc-rockthevote.smx] RTV will be made available in 120 seconds.
L 10/18/2015 - 22:04:25: [umc-endvote.smx] End of map vote will appear after 898 seconds
L 10/18/2015 - 22:05:14: [umc-endvote.smx] End of map vote will appear after 900 seconds

[Bittersweet]

Originally Posted by NotHappy I've abandoned the idea of tired vote. And i have another problem with normal Map vote. Once the vote showed up and map was changed on the second map there will be no vote and the map is replayed over and over again with this error: L 10/18/2015 - 18:20:40: [umc-core.smx] ---------------------MAP CHANGE: de_mirage--------------------- L 10/18/2015 - 18:20:40: [umc-rockthevote.smx] RTV will be made available in 120 seconds. L 10/18/2015 - 18:20:40: [umc-endvote.smx] End of map vote will appear after 898 seconds L 10/18/2015 - 18:22:41: [umc-rockthevote.smx] RTV is now available. L 10/18/2015 - 19:29:20: [umc-endvote.smx] Unable to create end of map vote time-trigger, trigger time already passed. L 10/18/2015 - 19:29:21: [umc-endvote.smx] Unable to create end of map vote time-trigger, trigger time already passed. L 10/18/2015 - 19:29:21: [umc-core.smx] ---------------------MAP CHANGE: de_mirage--------------------- L 10/18/2015 - 19:29:21: [umc-endvote.smx] End of map vote will appear after 898 seconds L 10/18/2015 - 19:29:21: [umc-rockthevote.smx] RTV will be made available in 120 seconds. L 10/18/2015 - 19:32:16: [umc-core.smx] ---------------------MAP CHANGE: de_mirage--------------------- L 10/18/2015 - 19:32:16: [umc-rockthevote.smx] RTV will be made available in 120 seconds. L 10/18/2015 - 19:32:16: [umc-endvote.smx] Unable to create end of map vote time-trigger, trigger time already passed. L 10/18/2015 - 19:32:16: [umc-endvote.smx] End of map vote will appear after 898 seconds L 10/18/2015 - 19:33:05: [umc-endvote.smx] End of map vote will appear after 900 seconds L 10/18/2015 - 19:34:17: [umc-rockthevote.smx] RTV is now available. L 10/18/2015 - 19:36:22: [umc-endvote.smx] Unable to create end of map vote time-trigger, trigger time already passed. L 10/18/2015 - 19:36:23: [umc-endvote.smx] Unable to create end of map vote time-trigger, trigger time already passed. L 10/18/2015 - 19:36:23: [umc-core.smx] ---------------------MAP CHANGE: de_mirage--------------------- L 10/18/2015 - 19:36:23: [umc-endvote.smx] End of map vote will appear after 898 seconds L 10/18/2015 - 19:36:23: [umc-rockthevote.smx] RTV will be made available in 120 seconds. L 10/18/2015 - 19:55:17: [umc-core.smx] ---------------------MAP CHANGE: de_mirage--------------------- L 10/18/2015 - 19:55:17: [umc-rockthevote.smx] RTV will be made available in 120 seconds. L 10/18/2015 - 19:55:17: [umc-endvote.smx] Unable to create end of map vote time-trigger, trigger time already passed. L 10/18/2015 - 19:55:17: [umc-endvote.smx] End of map vote will appear after 898 seconds L 10/18/2015 - 20:29:32: [umc-endvote.smx] Unable to create end of map vote time-trigger, trigger time already passed. L 10/18/2015 - 20:29:32: [umc-endvote.smx] Unable to create end of map vote time-trigger, trigger time already passed. L 10/18/2015 - 20:29:33: [umc-core.smx] ---------------------MAP CHANGE: de_mirage--------------------- L 10/18/2015 - 20:29:33: [umc-endvote.smx] End of map vote will appear after 898 seconds L 10/18/2015 - 20:29:33: [umc-rockthevote.smx] RTV will be made available in 120 seconds. L 10/18/2015 - 20:31:34: [umc-rockthevote.smx] RTV is now available. L 10/18/2015 - 22:04:25: [umc-core.smx] ---------------------MAP CHANGE: de_mirage--------------------- L 10/18/2015 - 22:04:25: [umc-rockthevote.smx] RTV will be made available in 120 seconds. L 10/18/2015 - 22:04:25: [umc-endvote.smx] End of map vote will appear after 898 seconds L 10/18/2015 - 22:05:14: [umc-endvote.smx] End of map vote will appear after 900 seconds

To get started, we need the following information from you:
What game are you serving?
What version of MM:S are you using?
What version of SM are you using?