[Oceen]

Can anyone show me a good configuraton in ptb.cfg??
It ses PTB: Can't transfer player , no vaild target in winning team and Culdn't transfer dead trensferring alive all the time. I have a 16 slot server

// PTB Configuration
//
// File location: addons/amxmodx/configs/ptb.cfg
//
// Settings are loaded on every mapchange
// from this cfg file
//
// For details on the settings check out the documentation
// in the readme.txt file
echo [PTB] Ptb.cfg is being executed
// These two cvars must be set to 0 so PTB can work properly.
mp_autoteambalance 0
mp_limitteams 0
// Control of chatmessages which can be 0 for off 1 on if set to 2 then Transfers will show in hud but not chat.
// If set to 3 it will show all messages in chat and transfers as hudtext
ptb_saychat 1
     
// Transfertype can only be 1, 2 or 3 and 3 is the most agressive transfer 
// 1 is PTBs original transfertype
ptb_transfer_type 1
// Set to 0 if admins with immunity also should be switched
ptb_switch_immunity 1
// Set to 0 if admins with immunity cant choose the team they wants
ptb_limitjoin_immunity 1
// Here you set which flag an admin must have to be immune against transfers (Default o ADMIN_LEVEL_C)
ptb_immunity_level "o"
// Here you set which flag an admin must have to be able to change PTB settings (Default l ADMIN_RCON)
ptb_access_level "l"
// If you want to see Transfers made in the HLSW chat have this set to 1
ptb_show_in_hlsw 0

// team selection control
amx_ptb limitjoin    on  // set limits on team joining
amx_ptb limitafter   0  // number of rounds after which teams limiting begins
amx_ptb limitmin     0  // number of minimum players on map for team limiting
amx_ptb maxsize      11  // maximum team size per team
amx_ptb maxdiff      2  // maximum team size difference
amx_ptb autorounds   3  // number of first rounds into match, which allow autojoin only
amx_ptb wtjauto      3  // wtj tries needed to become autojoined
amx_ptb wtjkick      5  // wtj tries needed to become kicked
amx_ptb kick         off // kick for wtj counts
amx_ptb savewtj      off  // save wtjs to wtj.log
// team balancing actions
amx_ptb switch       on  // switch/transfer players
amx_ptb switchafter  3  // number of rounds after which switching begins
amx_ptb switchmin    5  // number of minimum players on map for switching
amx_ptb switchfreq   1  // relative next possible switch round
amx_ptb playerfreq   7  // relative next possible switch round for player
amx_ptb forceswitch  0  // number of tries after which PTB switches alive, if neccessary
amx_ptb deadonly     off  // switch dead only
// messages (good to have on when debugging if you use statsx dont have them on)
amx_ptb tellwtj      off  // tell about wtj tries
amx_ptb announce     off // announce team status at beginning of round
amx_ptb sayok        off // announce team status, if teams are alright
amx_ptb typesay      off // use HUD messages
// team strength limits
amx_ptb maxstreak    3  // max. allowed team win streak
amx_ptb maxscore     2  // max. allowed team score difference
amx_ptb minrating    1.5 // minimum critical team rating
amx_ptb maxrating    2.0 // maximum critical team rating
amx_ptb superrating  3.0 // super critical team rating
amx_ptb maxincidents 50  // maximum kills + deaths before the score is divided by PTB_SCALEDOWN
amx_ptb scaledown    2  // divisor for kills and deaths, when PTB_MAXINCIDENTS is reached

[ZmifF]

I've made multilang support... take a look... English and Russian seems fine...

[Special]

Hi Lantz69.

First of all, thanks for this plugin. I'm using it for quite some time now and it works great if you have the right settings. People often complain about PTB, but it's just the settings that make it work well or not.

I have one question. Sometimes it happens one team has 2 or more players than the other. PTB does not allways correct this. Most people don't care too much about unballenced teams, but if one team has 4 players and the other team 6 they start complaining.

So I want the team difefrence te be zero or 1, but never 2 or even more. How can I do this?

I have this setting:

amx_ptb maxdiff 1 // maximum team size difference

[panda82]

i have a problem with the plugin. first time it worked now he does not work anymore.

This is my server.cfg

hostname "--- HTTP://BEST.MONYNET.RO/ ---"

sv_downloadurl "http://89.37.70.222/HLServer/cstrike/"

mp_autokick 0
mp_autocrosshair 0
mp_autoteambalance 0        `
mp_buytime 0.25
mp_consistency 1
mp_c4timer 35
mp_fadetoblack 0
mp_falldamage 0
mp_flashlight 1
mp_forcecamera 3
mp_forcechasecam 2
mp_friendlyfire 0
mp_freezetime 4
mp_fraglimit 0
mp_hostagepenalty 0
mp_limitteams 0
mp_logfile 1
mp_logmessages 1
mp_logdetail 3
mp_maxrounds 0
mp_playerid 0
mp_roundtime 2.30
mp_startmoney 800
mp_timelimit 25
mp_tkpunish 0
mp_winlimit 0

sv_alltalk 1
sv_aim 0
sv_airaccelerate 10
sv_airmove 1
sv_allowdownload 1
sv_clienttrace 1.0
sv_clipmode 0
sv_allowupload 1
sv_cheats 0
sv_gravity 800
sv_lan 0
sv_maxrate 0
sv_maxspeed 320
sv_maxupdaterate 101
sv_region 3
decalfrequency 60
pausable 0
log on
decalfrequency 60
edgefriction 2
host_framerate 0
exec listip.cfg
exec banned.cfg
rcon_password ****
ac_teamchat 1
lighting_skn_trails 0
amx_hpk 70

booster_show_connmsg 1
booster_autofps 200
booster_minsleepms 5
booster_force_systicrate 0
booster_cpu_enabled 2
booster_cpu_spikemax 3
booster_cpu_spikelevel 75
booster_cpu_floor 50
booster_cpu_mminc 2
booster_cpu_quiettime 300
booster_cpu_mmmin 3
booster_cpu_mmmax 8
booster_lite_mode 3
booster_lite_extra_sleep_frequency 0

esp 1
esp_allow_all 0
amx_soundfix 1
amx_soundfix_pallow 1
amx_contactinfo "http://best.monynet.ro"

// Execute the Admin Mod configuration file
// exec addons/adminmod/config/adminmod.cfg


alias "dslow" "sv_minrate 2500;sv_maxrate 2500;sv_minupdaterate 5;sv_maxupdaterate 5;echo dead slow"
alias "vslow" "sv_minrate 3500;sv_maxrate 3500;sv_minupdaterate 13;sv_maxupdaterate 13;echo very slow"
alias "slow" "sv_minrate 3500;sv_maxrate 5000;sv_minupdaterate 14;sv_maxupdaterate 14;echo slow"
alias "norm" "sv_minrate 3500;sv_maxrate 7500;sv_minupdaterate 15;sv_maxupdaterate 15;echo normal"
alias "fast" "sv_minrate 3500;sv_maxrate 9999;sv_minupdaterate 20;sv_maxupdaterate 20;echo fast"
alias "vfast" "sv_minrate 1000;sv_maxrate 0;sv_minupdaterate 20;sv_maxupdaterate 60;echo LAN fast"

alias "rates" "sv_minrate;sv_maxrate;sv_minupdaterate;sv_maxupdaterate"

// log off
// sv_logbans 0
sv_logecho 0
// sv_logfile 0
// sv_log_onefile 0
// mp_logmessages 0
// mp_logdetail 0
sv_unlag 1
sv_maxunlag .1
fps_max 600 

// 1024k //
rate 20000
sv_rate 20000
sv_cmdrate 80
sv_cmdbackup 6
mp_updaterate 80
sv_resend 6
mp_dlmax 800
mp_decals 300

sv_minrate 3500
sv_maxrate 9999
sv_minupdaterate 20
sv_maxupdaterate 20


badcamper_display 100
badcamper_sound 1
badcamper_announce 3
badcamper_show_spec 1
badcamper_check_all 0
badcamper_damage_reset 3
badcamper_punish 6
badcamper_damage_restart 1
badcamper_health 10
badcamper_allow 0
badcamper_min_players 0

amx_stealthvalue 255
amx_stealth3rdperson 1
amx_stealthspeed 325

amx_cmd_list 0
amx_cmd_log_file 0
amx_cmd_logging 3

file_access_read 1
file_access_write 1

restnames_check_names 1
restnames_immunity 1

he_damage_effect 1

jp_active 0
jp_arena 0
jp_version 
jp_cost 5000 
jp_speed 1
jp_rocket_delay 2.0
jp_rocket_speed 600
jp_rocket_damage 200 
jp_damage_radius 500
jp_admin_only 0
jp_limit 10

sv_timeout 22

sv_voiceenable 0

amx_hostname_update 60

and this is my ptb.cfg:

// PTB Configuration
//
// File location: addons/amxmodx/configs/ptb.cfg
//
// Settings are loaded on every mapchange
// from this cfg file
//
// For details on the settings check out the documentation
// in the readme.txt file
echo [PTB] Ptb.cfg is being executed

// These two cvars must be set to 0 so PTB can work properly.
mp_autoteambalance 0
mp_limitteams 0

// Control of chatmessages which can be 0 for off 1 on if set to 2 then Transfers will show in hud but not chat.
// If set to 3 it will show all messages in chat and transfers as hudtext
ptb_saychat 1
              
// Transfertype can only be 1, 2 or 3 and 3 is the most agressive transfer 
// 1 is PTBs original transfertype
ptb_transfer_type 1

// Set to 0 if admins with immunity also should be switched
ptb_switch_immunity 1

// Set to 0 if admins with immunity cant choose the team they wants
ptb_limitjoin_immunity    1

// Here you set which flag an admin must have to be immune against transfers (Default o ADMIN_LEVEL_C)
ptb_immunity_level "o"

// Here you set which flag an admin must have to be able to change PTB settings (Default l ADMIN_RCON)
ptb_access_level "l"

// If you want to see Transfers made in the HLSW chat have this set to 1
ptb_show_in_hlsw 1


// team selection control
amx_ptb limitjoin    on     // set limits on team joining
amx_ptb limitafter   0        // number of rounds after which teams limiting begins
amx_ptb limitmin     0        // number of minimum players on map for team limiting
amx_ptb maxsize      11        // maximum team size per team
amx_ptb maxdiff      1        // maximum team size difference
amx_ptb autorounds   3        // number of first rounds into match, which allow autojoin only
amx_ptb wtjauto      3        // wtj tries needed to become autojoined
amx_ptb wtjkick      5        // wtj tries needed to become kicked
amx_ptb kick         off    // kick for wtj counts
amx_ptb savewtj      off     // save wtjs to wtj.log

// team balancing actions
amx_ptb switch       on        // switch/transfer players
amx_ptb switchafter  3        // number of rounds after which switching begins
amx_ptb switchmin    5        // number of minimum players on map for switching
amx_ptb switchfreq   1        // relative next possible switch round
amx_ptb playerfreq   7        // relative next possible switch round for player
amx_ptb forceswitch  0        // number of tries after which PTB switches alive, if neccessary
amx_ptb deadonly     off     // switch dead only

// messages (good to have on when debugging if you use statsx dont have them on)
amx_ptb tellwtj      off     // tell about wtj tries
amx_ptb announce     off    // announce team status at beginning of round
amx_ptb sayok        off    // announce team status, if teams are alright
amx_ptb typesay      off    // use HUD messages

// team strength limits
amx_ptb maxstreak    3        // max. allowed team win streak
amx_ptb maxscore     2        // max. allowed team score difference
amx_ptb minrating    1.5    // minimum critical team rating
amx_ptb maxrating    2.0    // maximum critical team rating
amx_ptb superrating  3.0    // super critical team rating
amx_ptb maxincidents 50        // maximum kills + deaths before the score is divided by PTB_SCALEDOWN
amx_ptb scaledown    2        // divisor for kills and deaths, when PTB_MAXINCIDENTS is reached

Pls Help. 10x

i have the latest amxmodx the cstrike module is running and the ptb plugin is running but... no effect

Team Balancer 1.8b3 Ptahhotep ptb.amxx running

[panda82]

i fix it but... with mp_autoteambalance 2 lol

[Voltron]

How can I make it so that players are ONLY switched if the teams are unbalanced and not if 1 of the teams has a higher score?

[Special]

Yes I like that too.

1 balance player number
2 balance score etc.

[miko]

hey boy your so sex



// team selection control
amx_ptb limitjoin on // set limits on team joining
amx_ptb limitafter 0 // number of rounds after which teams limiting begins
amx_ptb limitmin 0 // number of minimum players on map for team limiting
amx_ptb maxsize 16 // (每队最大人数)maximum team size per team
amx_ptb maxdiff 2 // (2对最大人数差异)maximum team size difference
amx_ptb autorounds 3 // number of first rounds into match, which allow autojoin only
amx_ptb wtjauto 3 // wtj tries needed to become autojoined
amx_ptb wtjkick 5 // wtj tries needed to become kicked
amx_ptb kick off // kick for wtj counts
amx_ptb savewtj off // save wtjs to wtj.log
// team balancing actions
amx_ptb switch on // switch/transfer players
amx_ptb switchafter 3 // number of rounds after which switching begins
amx_ptb switchmin 5 // number of minimum players on map for switching
amx_ptb switchfreq 1 // relative next possible switch round
amx_ptb playerfreq 7 // relative next possible switch round for player
amx_ptb forceswitch 0 // number of tries after which PTB switches alive, if neccessary
amx_ptb deadonly off // switch dead only
// messages (good to have on when debugging if you use statsx dont have them on)
amx_ptb tellwtj off // tell about wtj tries
amx_ptb announce off // announce team status at beginning of round
amx_ptb sayok off // announce team status, if teams are alright
amx_ptb typesay off // use HUD messages
// team strength limits
amx_ptb maxstreak 3 // max. allowed team win streak
amx_ptb maxscore 2 // max. allowed team score difference
amx_ptb minrating 1.5 // minimum critical team rating
amx_ptb maxrating 2.0 // maximum critical team rating
amx_ptb superrating 3.0 // super critical team rating
amx_ptb maxincidents 50 // maximum kills + deaths before the score is divided by PTB_SCALEDOWN
amx_ptb scaledown 2 // divisor for kills and deaths, when PTB_MAXINCIDENTS is reached

[jerrico-lv]

I can't set amx_ptb maxdiff to 0, it automatically writes to me 232:22 PTB: (maxdiff) Maximum team size difference is 1.
I run 22 slots server and want it to be amx_ptb maxsize 11 and amx_ptb maxdiff 0
What is the problem?

[lantz69]

If you set it to 0 no one can connect to the server.
Lets say the first player choose CT. Then PTB will stop him as maxdiff is 0

So it is just impossible to get what you want.