Author
|
Message
|
New Member
|
04-16-2020
, 07:47
CS:GO [SM] admin problems
|
#1
|
Hi,
on my 4 CS:GO servers the admins_simple.ini is broken....
when i try !admin ingame it say's : [SM] You do not have access to this command.
the Logflie says:
Quote:
L 04/16/2020 - 13:12:24: [admin-flatfile.smx] Error(s) detected parsing addons/sourcemod/configs/admins_simple.ini
L 04/16/2020 - 13:12:24: [admin-flatfile.smx] (line 39) Could not open file!
|
my *.cfg's :
admin_groups
Quote:
Groups
{
/**
* Allowed properties for a group:
*
* "flags" - Flag string.
* "immunity" - Immunity level number, or a group name.
* If the group name is a number, prepend it with an
* '@' symbol similar to admins_simple.ini. Users
* will only inherit the level number if it's higher
* than their current value.
*/
"Default"
{
"immunity" "1"
}
"Full Admins"
{
/**
* You can override commands and command groups here.
* Specify a command name or group and either "allow" or "deny"
* Examples:
* ":CSDM" "allow"
* "csdm_enable" "deny"
*/
Overrides
{
}
"flags" "abcdefghiz"
/* Largish number for lots of in-between values. */
"immunity" "99"
}
}
|
admin_levels
Quote:
/**
* There is no reason to edit this file. Core uses this to map each named
* access type to a given ASCII character. The names are all pre-defined.
*/
Levels
{
/**
* These are the default role flag mappings.
* You can assign new letters for custom purposes, however you should
* not change the default names, as SourceMod hardcodes these.
*/
Flags
{
"reservation" "a" //Reserved slots
"generic" "b" //Generic admin, required for admins
"kick" "c" //Kick other players
"ban" "d" //Banning other players
"unban" "e" //Removing bans
"slay" "f" //Slaying other players
"changemap" "g" //Changing the map
"cvars" "h" //Changing cvars
"config" "i" //Changing configs
"chat" "j" //Special chat privileges
"vote" "k" //Voting
"password" "l" //Password the server
"rcon" "m" //Remote console
"cheats" "n" //Change sv_cheats and related commands
/**
* Custom flags can be used by plugins, but they can also be used to
* for you to expand on the previous groups, using Overrides.
*/
"custom1" "o"
"custom2" "p"
"custom3" "q"
"custom4" "r"
"custom5" "s"
"custom6" "t"
/**
* Root is a magic access flag that grants all permissions.
* This should only be given to trusted administrators.
* Root users can target anyone regardless of immunity,
* however, they themselves are not automatically immune.
*/
"root" "z"
}
}
|
admin_overrides
Quote:
Overrides
{
/**
* By default, commands are registered with three pieces of information:
* 1)Command Name (for example, "csdm_enable")
* 2)Command Group Name (for example, "CSDM")
* 3)Command Level (for example, "changemap")
*
* You can override the default flags assigned to individual commands or command groups in this way.
* To override a group, use the "@" character before the name. Example:
* Examples:
* "@CSDM" "b" // Override the CSDM group to 'b' flag
* "csdm_enable" "bgi" // Override the csdm_enable command to 'bgi' flags
*
* Note that for overrides, order is important. In the above example, csdm_enable overwrites
* any setting that csdm_enable previously had.
*
* You can make a command completely public by using an empty flag string.
*/
}
|
admins
Quote:
/**
* USE THIS SECTION TO DECLARE DETAILED ADMIN PROPERTIES.
*
* Each admin should have its own "Admin" section, followed by a name.
* The name does not have to be unique.
*
* Available properties: (Anything else is filtered as custom)
* "auth" - REQUIRED - Auth method to use. Built-in methods are:
* "steam" - Steam based authentication
* "name" - Name based authentication
* "ip" - IP based authentication
* Anything else is treated as custom.
* Note: Only one auth method is allowed per entry.
*
* "identity" - REQUIRED - Identification string, for example, a steamid or name.
* Note: Only one identity is allowed per entry.
*
* "password" - Optional password to require.
* "group" - Adds one group to the user's group table.
* "flags" - Adds one or more flags to the user's permissions.
* "immunity" - Sets the user's immunity level (0 = no immunity).
* Immunity can be any value. Admins with higher
* values cannot be targetted. See sm_immunity_mode
* to tweak the rules. Default value is 0.
*
* Example:
"BAILOPAN"
{
"auth" "steam"
"identity" "STEAM_0:1:16"
"flags" "abcdef"
}
*
*/
Admins
{
}
|
admins_simple
Quote:
//
// READ THIS CAREFULLY! SEE BOTTOM FOR EXAMPLES
//
// For each admin, you need three settings:
// "identity" "permissions" "password"
//
// For the Identity, you can use a SteamID or Name. To use an IP address, prepend a ! character.
// For the Permissions, you can use a flag string and an optional password.
//
// PERMISSIONS:
// Flag definitions are in "admin_levels.cfg"
// You can combine flags into a string like this:
// "abcdefgh"
//
// If you want to specify a group instead of a flag, use an @ symbol. Example:
// "@Full Admins"
//
// You can also specify immunity values. Two examples:
// "83:abcdefgh" //Immunity is 83, flags are abcdefgh
// "6:@Full Admins" //Immunity is 6, group is "Full Admins"
//
// Immunity values can be any number. An admin cannot target an admin with
// a higher access value (see sm_immunity_mode to tweak the rules). Default
// immunity value is 0 (no immunity).
//
// PASSWORDS:
// Passwords are generally not needed unless you have name-based authentication.
// In this case, admins must type this in their console:
//
// setinfo "KEY" "PASSWORD"
//
// Where KEY is the "PassInfoVar" setting in your core.cfg file, and "PASSWORD"
// is their password. With name based authentication, this must be done before
// changing names or connecting. Otherwise, SourceMod will automatically detect
// the password being set.
//
////////////////////////////////
// Examples: (do not put // in front of real lines, as // means 'comment')
//
// "STEAM_0:1:16" "bce" //generic, kick, unban for this steam ID, no immunity
// "!127.0.0.1" "99:z" //all permissions for this ip, immunity value is 99
// "BAILOPAN" "abc" "Gab3n" //name BAILOPAN, password "Gab3n": gets reservation, generic, kick
//
////////////////////////////////
//Team#1
"STEAM_X:X:XXXXXXXX" "99:z" // NAME
"STEAM_X:X:XXXXXXXX" "99:z" // NAME
"STEAM_X:X:XXXXXXXX" "99:z" // NAME
"STEAM_X:X:XXXXXXXX" "99:z" // NAME just blanked the steamID's and names for the Forum
"STEAM_X:X:XXXXXXXX" "99:z" // NAME
"STEAM_X:X:XXXXXXXX" "99:z" // NAME
"STEAM_X:X:XXXXXXXX" "99:z" // NAME
|
as u see i just use the admins_simple.ini all other files are never edited idk why i just getting this error now.
best regards
Last edited by asherkin; 04-16-2020 at 08:37.
Reason: Restore to previous version.
|
|
|
|