lhds_run problems under ubuntu - Page 5

P4rD0nM3 · 02-15-2009 , 18:43 Re: lhds_run problems under ubuntu

Since you already have your box on DMZ (which is not recommended by the way), you just need to open your ports using iptables. It's also time for you to use a search engine.

ENNEk · 02-26-2009 , 19:55 Re: lhds_run problems under ubuntu

Man, put the command:get with this command.

Code:

screen -A -m -d -S cs27015 ./hlds_run -game cstrike -port 27015 +ip XXX.XXX.XXX.XXX +map de_aztec +maxplayers 26 +sys_tickrate 100 +sv_maxupdaterate 101 +exec server.cfg

With this command... is much lighter than either.

This command is more optimized.

fysiks · 02-26-2009 , 21:18 Re: lhds_run problems under ubuntu

I've never had to use +ip, +port, +exec, ever and I have no problems. I'm assuming the default ip will be 127.0.0.1 and port will be 27015 and it should always, by default, execute server.cfg.

I use this with no problems:

Code:

 
./hlds_run -game dod +maxplayers 30 +map dod_kalt

Works on LAN and Internet.

P4rD0nM3 · 02-26-2009 , 21:28 Re: lhds_run problems under ubuntu

Quote:

Originally Posted by ENNEk

Man, put the command:get with this command.

Code:

screen -A -m -d -S cs27015 ./hlds_run -game cstrike -port 27015 +ip XXX.XXX.XXX.XXX +map de_aztec +maxplayers 26 +sys_tickrate 100 +sv_maxupdaterate 101 +exec server.cfg

With this command... is much lighter than either.

This command is more optimized.

That is assuming he even has screen installed.

Quote:

Originally Posted by fysiks

I've never had to use +ip, +port, +exec, ever and I have no problems. I'm assuming the default ip will be 127.0.0.1 and port will be 27015 and it should always, by default, execute server.cfg.

I use this with no problems:

Code:

 
./hlds_run -game dod +maxplayers 30 +map dod_kalt

Works on LAN and Internet.

That will work if you only have one IP. If you have multiple IPs then you have to explicitly say which IP should the hlds use.

fysiks · *Last edited by fysiks; 02-26-2009 at 21:54.*

Quote:

Originally Posted by ENNEk

Man, put the command:get with this command.

Code:

screen -A -m -d -S cs27015 ./hlds_run -game cstrike -port 27015 +ip XXX.XXX.XXX.XXX +map de_aztec +maxplayers 26 +sys_tickrate 100 +sv_maxupdaterate 101 +exec server.cfg

With this command... is much lighter than either.

This command is more optimized.

Works great

.

TeddyDesTodes · Location: 10.25.15.210

why exec server.cfg?!
btw u should add at least -tos it only has advantages and maby -noipx to disable ipx cuz there is no need for it

here is my line

Code:

screen -AmdS 28 ./start.sh -game cstrike -binary ./hlds_i686 +map td_testmap03 +maxplayers 21 +ip XXX.XXX.XXX.XXX +port XXXXX -secure +sv_lan 0 -noipx -zone 8192 -tos -pingboost X