[killertomato]

Thanks also the map keeps on reloading on round end for ultiduo. Is there a way to fix this?

[Hawkeye-]

I would guess your server specific config setting CVARs back in a very weird order, I'll take a look over the next week as I find time and let you.. I have heard this recently, but never had an issue when the configs were first released, so it's possible some behaviors might have changed..

Short answer, no idea yet..

[delidolu1genc]

Hello, thank you for the plug. good job
I have a few questions, I'd appreciate you answer.

1: Tf2lobby build server, the server address, and then wrote the correct rcon password, connect to the server error.
2: Tf2lobby site, what plugins should I install to the server to create a server? or Do I need to install.
3: Can you give us an answer on this issue explanatory to me, so I need your help

[Hawkeye-]

Originally Posted by delidolu1genc Hello, thank you for the plug. good job I have a few questions, I'd appreciate you answer. 1: Tf2lobby build server, the server address, and then wrote the correct rcon password, connect to the server error. 2: Tf2lobby site, what plugins should I install to the server to create a server? or Do I need to install. 3: Can you give us an answer on this issue explanatory to me, so I need your help

Tf2lobby requires no plugins and actually is designed around not having any plugins on the server.

Matchmod watches the rcon traffic for specific things tf2lobby does and will allow you to unload any mods intalled and get the game announcer, but it is not required.

If you are having issues from tf2lobby to connect to your server to start a game, you will need to contact your gsp to ensure firewall ports are open and your specifying the correct rocon port. Not ugh I am able to assist in this thread in that.

[Fearts]

Does this plugin still work? What am I supposed to do with the framework file? When I installed this and I go into the server and type !ready nothing happens. If I type !start it says I can't force a start.

[Hawkeye-]

Plug still works and is supported..

The Framework file is designed for league admins to create configs for their leagues that would work with matchmod (or without actually).

To begin a scrim, you will need to use the following commands

!scrim <password>
!pug <password>

This will begin the match cycle, if this command was not fired, the plugin will simply sit idle and not do anything.

Once you use those commands, it will set the server password and run the Pickup game config.

[maxmissyou]

hi, wen i use adminmenu ,select match start. there has some problem about

Unknown command "sm_matchmod_begin"

thx

[Hawkeye-]

What server / version, I'll take a quick look and see if I can spot anything.

Generally, to begin the method most often used is the sm_scrim sm_pug or sm_match commands, it's been a bit since i looked at this particular part of the code but I believe the old matchmod_begin I was phasing out of existence.

[Koumorikichikun]

The website is dead, can't access the plugin files. :/

[Hawkeye-]

Yeah, the server got hacked a bit ago, once I make it back to my desk i’ll Upload the files here