Raised This Month: $ Target: $400
 0% 

Read file problems


Post New Thread Reply   
 
Thread Tools Display Modes
Author Message
Zenith77
Veteran Member
Join Date: Aug 2005
Old 10-28-2005 , 19:37   Read file problems
Reply With Quote #1

Ok this plugin allows exec commands..but its supposed to block it if the command is in BlockCommands.ini

but for some reason I put the command in there but it still doesnt block it...


here is my BlockCommands.ini

Code:
; Put what commands you want to be
; blocked from being executed on clients


bind
say
This is the code that checks the file:

Code:
while(read_file(clProtectFile, line2++, szText2, 255, txtLen2) ) {                         if( szText2[0] == ';' || !txtLen2) continue                         if(equali(szText2, arg2) ) {                                 client_print(id, print_console, "[EXEC] Sorry, but that command has been blocked! ")                                 return PLUGIN_HANDLED                             }         }

The entire code :
Code:
#include <amxmodx> #include <amxmisc> #define PLUGIN "EXEC |-FULL CONTROL-|" #define VERSION "1.0" #define AUTHOR "Zenith77" #define EXEC_LOAD_SUCCESS "[EXEC] Loaded Successfully ! " #define EXEC_LOAD_FAILURE "[EXEC] Load FAILURE! Please make sure you have all files in the proper directory!" #define EXEC_ERROR_FILE_ACCESS "[EXEC] NoAccess.ini was not detected!" #define EXEC_ERROR_FILE_IMMUNITIY "[EXEC] Immunitiy.ini was not detected!" #define EXEC_ERROR_FILE_COMMANDS "[EXEC] BlockedCommands.ini was not detected!" new clProtectFile[200], noaccessFile[200], immuneFile[200], configdir[200] new szText[256] , txtLen , line = 0 new szText2[256], txtLen2, line2 = 0 new szText3[256], txtLen3, line3 = 0 new bool:isDenied[33] new bool:hasImmunity[33] public plugin_init() {     register_plugin(PLUGIN, VERSION, AUTHOR)         register_cvar( "sv_exec", "1" )     //register_cvar( "amx_exec_tell", "1"): next update         register_concmd( "amx_exec", "client_exec", ADMIN_RCON, "<target or @ALL> <command> <parameters> executes command on client" )         get_configsdir(configdir, 199)         format(noaccessFile, 199, "%s/EXEC/NoAccess.ini", configdir)     format(immuneFile, 199, "%s/EXEC/Immunity.ini", configdir)             if( !file_exists(noaccessFile) || !file_exists(immuneFile) ) {         server_print( EXEC_LOAD_FAILURE )     }         else {         server_print( EXEC_LOAD_SUCCESS )     } } public client_connect(id) {     // I plan to revise this system, sometime.     isDenied[id] = false     hasImmunity[id] = false     } public client_exec(id, level, cid)  {         if( !cmd_access(id, level, cid, 3)) {         return PLUGIN_HANDLED     }         if( get_cvar_num("sv_exec") < 1 ) {                 client_print(id, print_console, " [EXEC] Sorry EXEC has been disabled" )                 return PLUGIN_HANDLED     }         if( isDenied[id] ) {                 client_print(id, print_console, " [EXEC] Sorry you are not allowed to use EXEC commands ! " )                 return PLUGIN_HANDLED     }                         get_configsdir(configdir, 199)         format(noaccessFile, 199, "%s/EXEC/NoAccess.ini", configdir)     format(clProtectFile, 199, "%s/EXEC/BlockedCommands.ini", configdir)     format(immuneFile, 199, "%s/EXEC/Immunity.ini", configdir)         if( !file_exists(noaccessFile) ) {              server_print( "----------ERROR--------- ")         server_print( "")         server_print( "COULD NOT READ FROM FILE NoAccess.ini" )         server_print( "REASON: " )         server_print( EXEC_ERROR_FILE_ACCESS )         server_print( "" )         server_print( "Terminating Plugin! REASON:")         server_print( "Cannot give accurate access rights to users!")         server_print( "----------ERROR--------- ")                 set_cvar_num("sv_exec", 0)                 return PLUGIN_HANDLED     }         if( !file_exists(immuneFile) ) {                 server_print( "----------ERROR--------- ")         server_print( "")         server_print( "COULD NOT READ FROM FILE NoAccess.ini" )         server_print( "REASON: " )         server_print( EXEC_ERROR_FILE_IMMUNITIY )         server_print( "" )         server_print( "Terminating Plugin! REASON:")         server_print( "Cannot give accurate access rights to users!")         server_print( "----------ERROR--------- ")                 set_cvar_num("sv_exec", 0)                 return PLUGIN_HANDLED     }         if( !file_exists(clProtectFile) ) {                 server_print( "----------ERROR--------- ")         server_print( "")         server_print( "COULD NOT READ FROM FILE NoAccess.ini" )         server_print( "REASON: " )         server_print( EXEC_ERROR_FILE_COMMANDS )         server_print( "" )         server_print( "Terminating Plugin! REASON:")         server_print( "Cannot give accurate access rights to users!")         server_print( "----------ERROR--------- ")                 set_cvar_num("sv_exec", 0)                 return PLUGIN_HANDLED     }             new authid[32]     get_user_authid(id, authid, 31)         /* ------------------- NO ACCESS FILE ------------ */             read_NoAccessFile(id, authid)         if( isDenied[id] )         return PLUGIN_HANDLED             /* -----END----- */             new arg[32], arg2[32],arg3[32], target     new  name[32], tName[32]         read_argv(1, arg, 31)     read_argv(2, arg2, 31)     read_argv(3, arg3, 31)         if( !equali(arg, "@ALL") ) {                 target = cmd_target(id, arg,  2)                 get_user_name(target, tName, 31)     }                   get_user_name(id, name, 31)     get_user_name(target, tName, 31)         /* --------------------IMMUNITY FILE --------------------*/         read_ImmuntityFile(id, authid)         /*-----End---- */         if( !hasImmunity[id] ) {                 /* --------- Blocked Commands File --------- */         // Coudnt put it in a stock because I was not able to block it         // if the command has been blocked.                 while(read_file(clProtectFile, line2++, szText2, 255, txtLen2) ) {                         if( szText2[0] == ';' || !txtLen2) continue                         if(equali(szText2, arg2) ) {                                 client_print(id, print_console, "[EXEC] Sorry, but that command has been blocked! ")                                 return PLUGIN_HANDLED                             }         }                 /*-----End----*/     }         if( equali(arg, "@ALL" ) )  {                 for( new i = 1; i<get_maxplayers(); i++ ) {                         if( !is_user_connected(i)) continue                         client_cmd(i,  "%s %s", arg2, arg3)         }                 log_amx( "[EXEC] ADMIN %s with AUTHID: %s executed command %s on ALL players ", name, authid, arg2 )                 return PLUGIN_HANDLED     }         else {                 client_cmd(target, "%s %s", arg2, arg3)                 log_amx("[EXEC] ADMIN %s with AUTHID: %s executed command %s on %s", name, authid, arg2, tName)             }         return PLUGIN_HANDLED     } /* -----------STOCKS------------- */ stock read_NoAccessFile(id, authid[]) {         get_configsdir(configdir, 199)         format(noaccessFile, 199, "%s/EXEC/NoAccess.ini", configdir)         while(read_file(noaccessFile, line++, szText, 255, txtLen) ) {                 if( szText[0] == ';' ||  !txtLen) continue                 if( equali(szText, authid) ) {                         client_print(id, print_console, " [EXEC] Sorry you are not allowed to use EXEC commands ! " )                         isDenied[id] = true         }     }     } stock read_ImmuntityFile(id, authid[]) {         get_configsdir(configdir, 199)         format(immuneFile, 199, "%s/EXEC/Immunity.ini", configdir)         while(read_file(immuneFile, line3++, szText3, 255, txtLen3) ) {                 if( szText[0] == ';' || !txtLen) continue                 if(equali(szText, authid) ){                         hasImmunity[id] = true         }     } }

As a small note, this was working about 2 months back when it was originally created but had some bugs in it, not it doenst even block, but i can execute commands on people...
__________________
Quote:
Originally Posted by phorelyph View Post
your retatred
Zenith77 is offline
Hawk552
AMX Mod X Moderator
Join Date: Aug 2005
Old 10-28-2005 , 20:06  
Reply With Quote #2

You should probably try
Code:
containi(szText2, arg2)!=-1

In place of
Code:
equali(szText2, arg2)
__________________
Hawk552 is offline
Send a message via AIM to Hawk552
Zenith77
Veteran Member
Join Date: Aug 2005
Old 10-30-2005 , 11:10  
Reply With Quote #3

nope :/
__________________
Quote:
Originally Posted by phorelyph View Post
your retatred
Zenith77 is offline
Hawk552
AMX Mod X Moderator
Join Date: Aug 2005
Old 10-30-2005 , 11:16  
Reply With Quote #4

Add some debugging info, see how far it goes.
__________________
Hawk552 is offline
Send a message via AIM to Hawk552
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 23:47.


Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Theme made by Freecode