[HELP] Critical bug in the bullets (bursts) since 6027.
 

With version 6027 experiment, cuts to fire and the bullets do not give.
It is impossible to play well.

PS: It happens the same to most people.

Is there any solution?

PS: https://github.com/ValveSoftware/halflife/issues/1183#

PS2: I can only think they want to break the counter strike 1.6 for us to spend all the cs:go

Re: [HELP] They stop when shooting bursts and bullets do not register well.
 

Your sv_maxrate ?

Re: [HELP] They stop when shooting bursts and bullets do not register well.
 

sv_maxrate "100000"
sv_minrate "10000"
sv_maxupdaterate "100"
sv_minupdaterate "10"

Re: [HELP] They stop when shooting bursts and bullets do not register well.
 

Hello,

Use this:
sv_maxrate "25000"
sv_minrate "15000"
sv_maxupdaterate "100"
sv_minupdaterate "40"

And try

Re: [HELP] They stop when shooting bursts and bullets do not register well.
 

Thanks, I'll try.

Re: [HELP] They stop when shooting bursts and bullets do not register well.
 

sv_maxrate 25000 is not good for new hlds build. At least if you don't have shitty uploadspeed :P

Re: [HELP] They stop when shooting bursts and bullets do not register well.
 

the accuracy has improved somewhat but still bad and cuts, the server has 100 mb broadband.

Re: [HELP] They stop when shooting bursts and bullets do not register well.
 

What is your Upload speed (we don't care about your Download)

Re: [HELP] They stop when shooting bursts and bullets do not register well.
 

I have 6mb upload and download 60mb. (0 Choke and 0 loss)

It's the same for everyone in the updated servers, if hldsupdatetool game servers no problem.

Re: [HELP] They stop when shooting bursts and bullets do not register well.
 

https://github.com/ValveSoftware/hal...mment-18804543

OP is your issue as same as this? If so, then please respond to that github thread. Hopefully it will get enough attention for alfred to atleast look at it.

Basically when you try to spray with a gun, after first few bullets, there is a small skip, which basically screws up your entire spray. i have

sv_maxrate "100000"
sv_minrate "100000"
sv_maxupdaterate "100"
sv_minupdaterate "70"

In past i had maxrate as 25000.
and min as 20000. and still had same issues.

This happens to me every so often, but it definitely happens to 70-80+ pingers.